Philips 55PP9502 55" Rear Projection Television "open front tv" Questions

...front screens. Tops and sides are free but bottom won't come apart. remove the back bottom screws that are inside ,and pull out the control panel it has magnetic holders I have just opened my KDF 50 ...

...open the whole backside of the TV and did not locate the lamp...this is very frustrating. Look at the TV from the front, on the stand just under the TV there is a panel. Reach around the ends of the ...

...CAN'T FIND IN OWNERS MANUAL Behind the lower front silver snp-off panel. Then a twist button to open lamp door. I have the pt56lcz70 tv, and the lower front panel is black. How do I get to the

...careful. Tighten the black unit lamp screw with a screwdriver. 5th. Close the lamp cover. Turn the lock/open knob to the right. 6th. Replace the silver front cover. Finished. R. Vega from Puero ...

...TV from the front and back but still the picture is blured. I see. If that's the case, an inside component needs replacement like an IC or capacitor. I believe there is a "bulged" capacitor inside. ...

...open the front cover and use tape meter. Go to glass store and ask for plastic glass....You can use this plastic. If are you talking about lenticular screen, this is expense new (over $385) .Try to ...

...FRONT OF THE TV THE TV TURNS OFF OR ON AND THEN OFF AGAIN AND THEN BLINKS TWICE. I HAVE A PERFECT PICTURE EXCEPT FOR THE COVERGENCE. HELP PLEASE PHILIPS 50P8341 REAR PROJECTION TV the remote and ...

...cleaned the TV but Remote Sensor at front of TV got more dusty and now unable to receive Infrared signal of remote. That's my theory and can be confirmed by cleaning of Remote Sensor in TV.

...in the front it means your TV thinks the lamp door is open and shuts down. In my case i had to open the door and adjust the spring lever because it was not making good enough contact. Hope that

tv will not turn on, timer light on front blinks Open up front, look for an oil puddle on signal board(the one on RHS) below the right side picture tube. If you see oil/corrosion, then the tv is toast