...HD-61FN97 I want to install a new ballast board. Is it easy enough? We already replaced the lamp and the tv still does not come on. The geek squad said the next step is the ballast based on readings. ...
...HD TV, PVR, DVD, Video to connect and would like to know if you have a diagram I could use please? If I have to make do without one of these it would probably be the PVR as I our TV has freeview ...
...HD satellite or cable receiver DVD player Stereo receiver AV cables Cable connector HDMI cables Step1 Examine the back of your HDTV. You will see a series of input jacks for AV cables, (typically ...
HD and i had a similar if not the same problem. my ex-father in law is a tv repair guy he told me to resolder the power board connections that looked corroded. i did just that and problem solved. hope
HD Plasma (TH 50PZ700A). Panasonic Blu-ray disc player. 700HD monster cable. For surround sound and home theatre: The panasonic DVD home theatre Sound Sysytem sc-tp860. To communicate with Blu-ray and
...TV. The problem i have is that the set will not turn on. Whe i try to boot the set up it starts as normal as the blue power light stays on and the small red lamp/program led blinks slowly,but after a ...
...tv is a Optima HD plasma. It can be one of the sustain cards starting to go or a defective cable. The sus cards should be tested and eventually replaced. This failure could be due to a loose ...
...HD of any kind it may be the resolution setting due to the fact that DVD players are essentially sending a standard def signal 480p while the monitor is looking for a High Def signal 720p or 1080i or ...
...HD picture from AV4 or AV3 I have sound when connected to either input but there is no real picture. There is "scrolling color lines" no actual picture scrolling. Problem started when the power to ...
15 questions posted
Usually answered in minutes!
1,061 Questions
920 Questions
867 Questions
724 Questions
662 Questions