Philips 51PW9363 51" Rear Projection HDTV-Ready Television "sanyo vision" Questions

...vision like 3d its a 48 inch sanyo it just happened all of a sudden try to adjust it's convergence is there a way to manually adjust the convergence? magic focus is not adjusting it past the ma of ...

vision. The convergence amp(s) need to be replaced. Your unit takes two STK392-110 Sanyo built amps. In addition all the low ohm resistors should be tested for change in value and replaced as needed..

...vision TV shows double pictures and the red and green contrast is extremely bright. In this particular unit what you're describing is a failure of the convergence amps. This unit takes two STK392-110 ...

vision with a red outline. I have a zenith R49W36. The picture looks like I need 3-D glasses Your TV most likely has a convergence failure. ( common problem ) Here are some of the most common symptoms

vision effect. It is more distorted in the upper corners then in the middle of the picture. I removed the back and covered the red flood light and the distortion goes away (but so does the red color).

...vision. I did the convergence from the set up menu but the colors would not align on one another prefectly. The red and blue always seem to be a bit off.Could something be out of wack from the move? ...

...vision on the screen. What is the problem and What part do I need to get it fix? it The best advice I can tell you at this point is to go to TV repair kits.com and order the complete convergence kit ...

...vision and red glowing around figures. convergence IC's need replacing, and testing of resistors on them Your TV most likely has one of two possible problems. Problem #1: Convergence Chip Failure ( ...

...vision, and cant brighten up I have a 50UX7B/K/W or 46UX7B/K and the picutre is blury and kind of a double on the right, and now i also can figure out how to lighten it, the book says to go menu, but ...

...vision its a 2003 philips rear projection tv and it is a 55inch flat screen Sounds like your convergence chips are shorted which would make the set shut down. Its also possible that the flyback has ...