Philips Magnavox 51MP392H Rear Projection Television "clean screen phillips" Questions

...screen to amplify the picture quality? please help The CRT coolant needs replacement. Phillips has a bad problem with CRT coolant needing replacement. You can get the Phillips CRT coolant kit which ...

...screen have been cleaned picture still not clear... You need to change the coolant in the CRTs. Its a common problem with phillips/magnavox TVs. You can get the coolant replacement kit at the ...

...phillips universal remote that works allright. I adjusted the convergance until it seemed the best it could be the only problem i seem to be having now is... it seems a bit blurry, i can see blue ...

...50" rear prjection screen tv doesnt come on at all. all it will do is repeat a high pitch whistle over and over Bulb is dead, replace and clean dust from cooling fans including projector

...Customer, hidden tech, and hidden convergence.the dark picture may be the lens dirty--clean them if you have not and the red picture may be adjustment of the screen controls just slightly off.

...screen is a Fresnel lens and will wick up moisture, the one with the vertical grooves is the Lenticular and either one will leave a mark, if you have to use liqud, I would try distilled water, but no ...

...screen is reddish .....Does the bulbs need to be changed...or does this one have a conveyance or would this be it because things aren't blurry everything pink reddish... If the bulbs need to be ...

clean them with a damp paper towel-wipe them off with a dry one.put back back on unit. screen/focas controls are in front of unit.remove speaker grill remove black cover using phillips screwdriver.you

...clean the lights and screen to make it not so hazy Hello, cleaning may help, but I would bet the coolant in the crt's is mildewed, a common issue with Phillips projection sets. you can unplug and ...

...clean the light engine lens, the mirror and the inside surfaces of the front screen. ? Exercise caution using canned air. Do not tilt the can and allow any liquid propellant to escape. I had a few ...