Sharp 27N-S50 27" TV "chassis remove" Questions

...while in place; without having to relocate to a bench and remove the entire case. No,there is only one way....remove the back and pull the chassis....IR circuit is up front,edge of

...remove 2/3 screws from black chassis frame, on back bottom, release wire restraints, look for two clips on front of black chassis. Can see easier if you remove speaker grill and small panel. Remove ...

...to remove the chassis so I can reuse the wood cabinet for something else. Is this possible If you can get an other cabinet, suitable to its chassis, you can.

...remove the entire chassis of a Sony KV-34HS510 Wide Screen TV and installed it into a Sony KV-40xbr800 TV since they both use the same chassis. The problem is the 34 what problem do you have? sound, ...

...check those with a magnifyingglas and re solder. sony has a plastic support frame under the chassis which unfortunately covers most of the critical spots but removing it to re solder could ...

...keeps flickering. Can someone help with this problem. Thank you in advance!!! That unit is a ctc203 chassis and if it's never been in the shop before it's probably ring cracks in the HV or power ...

...chassis and remove it from the holes. They are kinda L shaped. Be careful not to yank any wires. I would discharge the tube and unhook the neck board and the anode cup to make sure you don't yank ...

...remove entire chassis (I presume you are keeping this) then carefully break the neck of the tube to gradually implode it (making it totally safe to dispose of), dispose of the cabinet/tube, keep ...

not mater. after replacement of QA02 mpu no results. desoldered volume down and up keys and sprayed chassis with flux remover on both sides of chassis and sumerged vol keys in alcohol solutions for 10

Remove the chassis of the TV as per the instructions found in the service data (you will need to buy the schematic diagram and the service data sheets for this set) 4) with the chassis removed and the