Sharp Aquos LC-37GD6U 37 in. LCD HDTV "change channels hdtv antenna" Questions

...change channels watching Dish but not local TV from the antenna. Our tv sharp aquos LC 52 GD^U 52 in. HDTV LCD plays a narrative along with the closed captioning on selected channels, especially ...

...channels correct for your situation? Use menu - setup - Antenna Setup-DIGITAL to examine the signal strength. Is there nothing at all, or is it just a question of strength? Odds favor a change in ...

change channels not even on tv buttons I am going to assume you have auto-programmed the TV. If you haven't, do so and let it finish. Make sure you are in the right mode, e.g. Antenna for over the air

...change channels, turn TV on, Power and Opc blinking impossible to change channels, turn TV on, both Power and Opc LED's are blinking. Before that, TV seemed in "demo" mode. Picture was showing at ...

change channels.Also,make sure your TV antenna setting is set to "Cable" from the "Air/Cable"(Antenna setting).You will have to read your manual to find out how to get to this menu.After that do a "Ch

...change input, volume, power and channels manually. Do you think the antenna input is broken or is it a set-up problem of the TV since I don't have the rem. control? Your dish remote should be set to ...

...single number if the digital channels are programmed correctly then change the cable coming into the tv from antenna making sure that it isnot crossing any power wires good luck and hope that i ...

...channels as the audio changes each time the remote is pressed, just nothing but black picture. Have surge protector, have antenna, have checked all connections for fit. Is it a video card failure? ...

...change the source of your signal. Press Enter. Use the left/right arrows to select your source. Press Enter to save the setting. Press Menu to exit. Return to this CH setup menu and use the up/down ...