Question about Sharp LC Televison & Video
...direct tv cable on another tv and it works just fine. Can't seem to get signal in this TV This is basically a message for no signal on the tv, make sure the tv itself is on the correct input for the ...
...Direct TV. I have the remote control but can't program the channels. I am on cable. IF YOU, STILL SUBSCRIBE DIRECTV, YOU MAY GO TO THE MENU, USING THEIR CLICKER AND GO TO THE PART OF MENU, WHERE YOU ...
Question about Sharp LC Televison & Video
issue as well but only on the video channel which connects to the cable box to view cable tv. No blinking lights that I have ever seen, and does not happen on any other of the settings (HMI, comp Etc)
...TV is on Channel 73, I wanted to change the channel but there was no response and also will not turn off. I followed instructions in the troubleshooting manual by holding the POWER button on the TV ...
Question about Insignia Televison & Video
...remote control. If you are on a Dish network or Direct TV network change your remote address . This is a common problem on these networks, especially if your neighbor has the same networks. ...
...facility is using just standard analog cable, it should be fine. Just turn the TV on and go through the setup menu and let the TV autoprogram itself to find and program into memory all active ...
...itself right back off.Also when I try to use the control buttons for the volume directly from the tv it switches to another function for instance, changing the channels. Hi: This manufacture is ...
...tv still displays the menu and settings, the cable box still turns on and changes channels, and the dvd player still turns on and sends audio to the tv. but i cannot seem to get a signal to the tv ...
...TV itself and look for, "channel scan" or "auto memory". Run a scan. If there are no channels found go back to the "channel scan" screen. You will see an option saying, "air" or "cable". Switch it to ...
Question about Samsung Televison & Video
...tv itself? please help. Thanks, Janet Unfortunately Without the cable box you will have to screw the coax cable into the coax input on the tv or You can screw the coax cable into a vcr and then plug ...
47 questions posted
Usually answered in minutes!
228 Questions
121 Questions
69 Questions
40 Questions
36 Questions