...remote, above and to the right of the arrow keys. (There is no Menu button on the TV.) Use the left/right arrows to navigate to Setup. Next use the up/down arrows to select CH setup. Press Enter. If ...
get into menu mode by pressing the menu botton in the center of remote. Next use the < and > arrows to get to OPTION menu. Use the ^ and v arrows to get to the Caption Setup menu and press Enter
...remote and arrow right then look for fact init and any othe reset and turn them on arrow back up to fact init and hit enter let set recyle and unplug and re plug in 5 seconds the set is noe in virgin ...
...be in the service menu. With your remote arrow up until the top line says industry init. Arrow to the right and hit enter. Screen should turn green and say factory init success. I hope this helps
arrow on the remote. Make sure that the remote is facing the television and is not obstructed. Press the power button on the Sony TV. Press the button on the television itself, not the power button on
...I cannot find a simple solutin on the menu on the remote press menu, use the up and down arrow buttons to seach for aspect/screen press select/enter to choose the screen (you probally have it on
Question about Sharp Aquos Televison & Video
...REMOTE------------On the TV ENTER is same as -----TV/VIDEO UP arrow is same as ---CH up DOWN arrow same as---CH downn RIGHT -> same as ---VOL + LEFT -> same as ---VOL - So, do the hard way as ...
Question about Sharp Aquos Televison & Video
remote, press the up arrow to reach the nest page. The first option should say INIT. Arrow to the right and hit enter. In a few seconds your screen should turn green and say success. Unplug the TV and
...arrow on your remote until you are on page 2/26 (might be 2/some other number besides 26). The press the right arrow to turn on INIT + cause on. Press enter. When the screen turns green unplug the ...
Question about Sharp Aquos Televison & Video
...remote and arrow right then look for "fact init" and any other reset and turn them on. Arrow back up to "fact init" and hit enter. Let set recycle to green and unplug/re-plug in 5 seconds: the set ...
291 questions posted
Usually answered in minutes!
878 Questions
339 Questions
295 Questions
241 Questions
163 Questions