Peavey IPR-3000 Power Amp "powered speakers eq" Questions

...the A and B Outputs of the EQ to the power amp/ speakers, etc (you'll need jack or XLR cables depending on what is powereing your speakers) i dont know how to connect my speakers to my pioneer dmj ...

...EQ's are right before the power amps in the signal flow. The monitor output would drive two 8 ohm speakers daisy chained at roughly 300 watts RMS... I can't imagine needing more than that for a venue ...

EQ Input L/R ==> Amp Input L/R ==> Speakers L/R Using insert cables you would have a single 1/4" connector at the mixer end (inserted in to the "insert" L or R) and the other end into the EQ. If

sound. Mon speaker sounds great. Switched speakers and cables and whichever speaker and cable is connected to Main, Main output is muffled. Is your graphic eq assigned to main and is kit set correctly

...speakers to the amp won't give you any more loudness. With my bass and my tone, I've found that my bass sounds good with all eq at the same level and the mid scoop turned on, so I just max out all my ...

...Powered PA Speakers are decent speakers with an output of 200w max and a 3 channel with Eq. Both units are decent starter but not really compatible for a small band needing quality sound. When ...

...If i run powered speakers through the main output on the front will I not have effects? If you run the speakers FROM the main you should have BOTH the effects and the EQ invilved with your

...speakers First thing is to run a known signal from a simple device like a small CD player to verify the problem. If these are driven from a mixer, the EQ could be set to kill the highs. Assuming it ...

...EQ such that frequencies below the speakers rating were sent at high levels. Your speakers are rated for a low end at 55 HZ. You should have the eq cut the gain below that. The leftmost EQ (50 Hz) ...

...EQ. I assume you are using at least 15 inch speakers if you want to feel bass. Look up your speakers specs... you will need speakers capable of 32 Hz to feel much. With this amp your speakers should ...