Coleman Propane Forced Air Heater w/Electronic Ignition (50,000-80,000 BTU) "furnace motor" Questions

...furnace and need to replace the Fan Motor were can I find the fan spec for replacement? It was built in 1987 Model # G8A75DC10-17 Serial# A 10221CKA Forced Air Furnace Categorie I magic chef furnaces ...

...furnace front cover,locate the inducer motor,,if it isnt turning,but is warm or hot after a minute or so,likely the inducer motor is bad..if it isnt turning and isnt warm after 1 minute,then likely ...

...furnace and still the blower motor and IDM motor both start,Does this mean the control pcb is bad? NO BECAUSE THE BOARD IS TELLING THE FANS TO STARTARE THE CONTACTS FUSED TOGETHER OR STUCK IN THE ...

...motor is not working so the furnace heats up but because the fan never kicks in the furnace is overheating and shutting off. sit by your furnace while it is on and see if you can hear the motor? if ...

...motor. If your furnace is an 80% effficiency rating or above it will have a 'combustion air' fan....that will be a small on in front of the furnace in the vestibule under the front cover. If you have ...

...furnace on it lights for a while, but the blower motor sounds like it is trying to run, but is bound. its either a bad motor or bad capacitor if you try to spin the wheel by hand and it starts then ...

...furnace, but nothing happened. Propane tank is full. Unit is about 3 years old & about 1 year ago I had to have the motor replaced (rebuilt). Does it sound like the motor again, or is it something ...

...furnace. the blower motor works intermittently. It may or may not come on when the furnace burns. What is the problem? Hello, usually this is a problem with the intergrated control board on the ...

...furnace has already had this repair twice - replaced the motor because the bearings are bad. It cost us over $700 each time- 2008 and 2010 in Northern Illinois. I think that it is ringing/whining ...