...clear the protection fault and reset it. If the reset does not help you will need to have a tech look at the set and take voltage measurements inside to determine which section of the tv has failed ...
...times over 5 years under the extended warranty. After watching the tech, who was good, but under time constraints, it was clear that most anyone could do it if they could read and follow
...clear the problem. to do this, with the tv in standby, quickly press "display", channel "5", volume "+", then power. once the service menu is up, press 8 and then enter, and lastly the power button. ...
...TV, but he said the convergence chip needs repairing is worth buying? and how expensive is it to be repair? Now is this what really is the problem is your friend's have a tech man tell him so? in any ...
...tech supportand they said unplug the TV and plug it in after about 5 minutes. I did that and now it went from bad to worse. No picture at all. I have whiteand black static on the screen that also has ...
TV blinks 10 times. Possible solution should be to check and replace on the G1 board Q1600 and Q1601 if shorted and R1614 and diode D1605 open. IF You r good in electronic repair then the problems is
Question about Hitachi Televison & Video
...tech to come out to your residence to fix the signal issue. When the correct time display is on the Scientific Atlanta box, THEN power on box and problems should be solved. An alternate way to reboot ...
Question about Mitsubishi Televison & Video
...tv warms up and once in awhile it actually clears up for just a minute or two,then goes back to the same problem with the original Mitsubishi remote go into the customer menu and to the Convergence; ...
...tech, now computer engineer too), because the entire TV is controlled by software. There are tons of secret codes and key sequences (from the remote) which factory repair technicians can use to ...
13 questions posted
Usually answered in minutes!
2,410 Questions
1,124 Questions
809 Questions
789 Questions
510 Questions