RCA P52926 52" Rear Projection Television "flat schematic screen" Questions

...schematic/service manual find the physical location of the two convergence amplifiers (Usually attached to a big metal silver in color heat sink) (Basically it will look like two big black six sided ...

...flat standing upward, about 11/2" and 3/4" in hight and about 1/8" in thinkness) if it look's burt when you know what to do, I would also check to see if other parts that supply's the voltage to this ...

flat tube CRT tv. The problem is that there is no vertical scan---the picture is a single horizontal line in the center of the screen and all other systems appear to be working. Two questions. What is

schematic for this set,Any help or comments would be appreciated. will the 150 replace the 110's?Thanks,Gene hey,I am not a pro at this and this is just my story ,It's fixed and running good....here's

...flat filters and no blown fuses on the main PS bd. There were cracked solder connections on the main PS bd which I have resoldered but still the same symptom. I tried powering up with the Z bd cable ...

...with no picture. I have replaced the lamp and still have the green screen It isn't the lamps. It is in the controller circuit board. The cost may be more than a new TV. Get a LED or LCD Flat