RCA HD52W56 52" Rear Projection HDTV "tv pop quit" Questions

...pop and TV quit. It's not the bulb since fairly new and the bulp idiot light is not on. I think it may be the color wheel motor and would welcome any suggestions. Remove the lamp and look into the ...

...pop and then the television quit working. The green light continued to work but there was no picture or volume. I turned it off and then again back on and heard a buzzing sound for a few seconds and ...

42" sony wega wont power up. makes popping or clicking noise. |Last night the tv just made a snapping noise and then quite. When you try to power it up it makes a clicking, popping noise. The only ...

...The tv was working fine all of a sudden i heard a pop everything quit working check the lamp.. my first thought was lamp broke, do you get any flashing lights? unplug it from the wall then plug back ...

RCA DLP 50'' TV Sound and Picture problem I turn on the TV and it has no sound or picture. The green light indicator for "on" lights up and then flashes. As it is doing this there is a crackling and ...

TV off. Later I turned it back on and I heard a pop, then this awful grinding noise. I changed out the bulb about a year and a half ago. Picture is still quite bright. I pulled the back off the TV and

...tv. Often i hear a "pop up" sound from back of tv. What could cause this? I quite certain that this is the Back Light Lamp Ballast power supply that may be causing this pop. If it's still under ...

...TV when it made a loud pop and quit working, I unplugged the set and checked the main fuse, all OK. I checked for power at the main board where the cord goes into and along other areas at the red & ...

...pop Last night the tv made a loud popping noise, like a light bulb burning off excep much louder. The TV stopped working, no picture, no sound. This morning I turned it on, the green light comes on, ...

tv getting power but no sound or picture was working when unplugged vacuum it quit has power but no picture or sound what so ever can not change channel or see volume bar when you try and turn it up ...