RCA HD61LPW42 61" Rear Projection HDTV "dlp color running" Questions

...color just went out on my Phillips 50" HDTV DLP and its making a humming noise when I turn it on. Could this be the color wheel ? If so, is it worth it to fix it or should I buy another tv ? I ...

...now color is all blue and green no red at all. was color normal before color is generated on dlp by a device called a color wheel...when you start it up does is sound like a motor running ...

...DLP Color Wheel ' eHow.com http://www.ehow.com/how_7697815_change-dlp-color-wheel.html#ixzz1VdDl2OQb 3 Remove the projector lamp. You can reach the color wheel without doing it, but you are less ...

...color wheel. aa dlp uses a mechanical motor to spin a coloered segment disk. this turn the white light of the lamp into your colors of pictures. Now anything that moves will eventally break. the ...

...whih was sporadic but still worked with a new bulb. Both bulbs look intact. This sounds like a problem with your color wheel see link

...dlp, screen is darker then should be, i installed new bulb. On the right side of the screen, running from top to bottom, and 2" wide the screen is bright and seems normal. Could this be the color ...

...running together I have been told the problem is related to the covergence module. Sears could not provide a part number. this tv does not have a convergence module .could be a light engine problem, ...

color wheel. In DLP type sets the wheel turns at up to 12,000 rpm and if bearings in the tiny motor fail it sounds like a fan or even a grinding sound. Let me know if you have questions. SD TECH - Buy

...& High Power Lamps. Just Glad I don't own one. Must be expensive to run of electricity. Good Luck Cheers TJH Mitsubishi DLP TV Bulbs DLP Color Wheel Bad Bearing Symptoms and general service ...

...screen and colors are starting to run on my HITACHI projection 52 inch telivishion If your set is a DLP model set with a lamp, then I would assume your Light Engine has failed. These are very ...