RCA F38310 38" TV "direct changes channels itself" Questions

The TV goes crazy and changes channels by itself! try to interrupt it by pushing the channel in the opposite direction or tapping the channel up/down button with your finger.

...channels directly. The display screen tells me "channel fix off" but clearly it is not??? I have just got a kv-20s43 and your best bet is to try to restore settings, here, To reset TV to factory ...

...Direct channel selection buttons (0-9). In the event of entering incorrect password press the RESET button. Then press the ENTER button. Enter the same password for confirmation, then press the ENTER ...

channels at about 3-5 second intervals, then turns itself off. I don't have the original remote control, therefore I have no CANCEL button to hit. I unplugged the TV for a coule hours, but that didn't

changes channels or goes into programming mode. This happens 100% of the time. I've tried taking the batteries out of every remote in the house, figuring a stray signal was causing this, but that didn

...channels or volume. I open the casing and see one board inside that looks to have all the controls. Is there a need for a repair manual??? If I change the circuit board will the remote control still ...

...channels started switching by itself and the volume keeps going up to 100. when i set a channel it stays there for a minute then starts switching again same with the volume. i can turn it down but ...

changes channels on its own in the upward direction, I had the same problem with my GE 31GT740 TV and fixed myself. GE will give you the runaround and have you calling RCA who has no clue. The cure is

...changes channel and volume, and shuts off by itself. Hello all. I have an RCA TV that has all the symptoms above-- channel jumps, powers off, goes into channel search mode, and volume increases. Have ...

...checked, but I'll throw it out there anyway, you might be able to change the source or input directly from the TV itself. I hope this helps and good