...eject does not work Best to get the service manual, this will explain the best way to get the tape out of the machine without causing further damage to the drive system. However if you can't find it, ...
my timer recording funtion isn't working i set up the timer funtion but when it goes to turn on. It stops and ejects the tape. I tried a new tape and it still does it. I cleaned the heads and that ...
Question about Mitsubishi Televison & Video
eject the tape, since it wont come out or eject, the Power goes out and shuts off. How do I get the defective tape out???? If this can only be done by a dealer, does anyone know of a dealer or service
...tape stuck in unit and won't eject it mitsubishi u 82 fuses are not blown ,uit comes on but turns off if I hit reject button You might have to remove the tape yourself first. Some makers provide ...
eject and shuts of in a few seconds. Tape is stuck & not wrapped around anything. Help me get it out, please!? Remove the top AFTER disconnecting the power and wind the loading motor backwards. Whilst
...tape and this caused the eject to take place. What was happening in your case was the arm would come fully out and the sensor would sense no tape so the VCR shut off in a trouble condition to prevent ...
...eject the cassette. The player just seems to continually drive the tape slowly, even when the ON/OFF button has been hit. I have to turn the machine off and manually wind it out. The drive belt seems ...
...eject. The tape only came half way. It was "free" from the mechanical stuff, but wouldn't come out all the way like normal, so I had to use tongs to get it out. Now it thinks there is still a tape in ...
Question about Panasonic Televison & Video
eject the tape but not all the way then the unit will shut down. When there's a problem with the drive mechanism of a VCR it will shut down to prevent damage. All operations of a VCR are controlled by
Question about Toshiba Televison & Video
...tape i've tried different tapes and they all do the same. This sounds like a problem caused by the Mode Switch. These in VCR's can cause all sorts of odd things. The switch can become faulty, ...
2 questions posted
Usually answered in minutes!
2,410 Questions
1,124 Questions
809 Questions
789 Questions
510 Questions