Samsung LN-R328W 32 in. HD-Ready LCD Television "tv volume control problems" Questions

...tv and the volume control is stuck on volume up but i have never even used the tv speakers or volume control. Same problem with my set. The volume was either fully up, or fully down (usually down), ...

...out and put on again should be then at set volume,the tv's now days have memory so it should start up at volume preset Use the remote control to go to the setup menu, then sound, change it

...volume problem , i have samsung 46 inch lcd , picture working fine but no sound? my tv have no sound , picture working fine ? Hi is your television running through a foxtel box or something else that ...

...volume control on it, so I wouldn't think it is the problem. The previous tv, an offbrand, we had hooked up with the same receiver worked just fine. HELP! :( Some models have a volume limit setting, ...

...volume. The only thing that works is to totally turn off power to the TV and turn it back on again. Ur signal turner board have short in it.Call for warenty sevice,must replaced the board this is an ...

...volume disappeard and subtitles show on every channel. TV is not more then 3 days old. Tried "sound" option on menu; however it only gave 6 options, none of which were helpful in solving the problem. ...

tv changes it source from cable to pc all on its own with no use of remote and the volume will not work the picture options screen keep showing up and no one is using a remote or tv controls to change

...volume control and the red light indicator lights up on the tv when buttons are pressed, but nothing happens. There could be a cable that is not completely seated inside the set, there may be a ...

...volume for each channel but I still couldn't determine what the problem was. I decided to turn it off for a few hours (around 2hrs) when I tried the TV again the sound was back. Unfortunately when I ...

...TV i HAVE A PROBLEM WHERE THE REMOTE DOEAS NOT OPERATE ANY FUNCTION EXCEPT THE VOLUME. THE RED LED ON THE MAIN POWER SITCH FLASHES WHEN I SEND A COMMAND BUT NOTHING HAPPENS I had a similar problem. ...