no sound from dvd player no sound from stereo only plug in from ear phones work hi dear member , you must change IC : SM7512FL
Pioneer HTZ-370DV Surround Sound System Power suddenly turns. When I turn it back on there is the message "OC err". Change your Output IC
...sound, and DVD player have conflicting IR codes. The DVD player probably does not use a discreet IC to filter the IR sensor, and the processor in the DVD player is having to look at all the IR codes ...
sound but shows nothing on the screen how can this be fixed? i found the problem of the video blackout of the second screen, it's the chip marked CC5R sot23-6 close to the a/v connector. it's possible
change it ,if Fuse is ok then you have to sent this VCR at Authorised Service centre,to rectified this Power Problem. Regards First check the fuse ,if blown out replaced it,,, second the switch may be
...IC regulators, as well as diodes and capacitors for leakage and/or short circuits. Look for bad solder joints, burnt spots around parts, swollen capacitors etc. The ICs in this series (especially ...
...CHANGE SOUND SYSTEM BUT SET IS NOT KEEPING MERMORY HAVE TO RETUNE EACH TIME I POWER ON. eprom could be bad or the microchip have a tech check your set.good luck hi i need a the dvd part i have ...
...Still no sound. I noticed the headphone jack works and i can hook it up to auxiliary speakers, so i'm not desperate (or throwing it in the bin yet). Any ideas? Thanks YOU MUST CHANGE ...
sound but not the video then its not the laser pickup assy for sure. if the vcr had a oicture then that means all your cables are connected correctly. Now what it sounds likje is the video switcher IC
SOUND BUT WE LOST THE IMAGE ON THE SCREEN. CAN IT BE FIXED? ENRIQUE PERCAL Uplug from wall outlet, remove main battery, allow 30 minutes to discharge the player, this will reset the microprocessor ic.
247 questions posted
Usually answered in minutes!
1,031 Questions
445 Questions
373 Questions
357 Questions
327 Questions