...light does not blink on the bulb indicator... Refer to mlapres' tips, pls. mlapres Rank: Wiz Rating: 84%, 330 Votes What you need is to have the lamp timer reset. To do so, perform the following; You ...
remote controls. Using CFL bulbs in sockets connected to a dimmer can result in occasional ?pulsing? of light, even when the light switch is turned off. These IR pulses can be confused by the TV as IR
...also worked on my Pt-52DL52 Panasonic also by pushing the Blue action button on the remote and the volume down button on the TV. But first wait until the replace bulb warning light is off, then do
.......lamp reset" Press the center button on your remote (the circle button right in the middle of the four directional buttons) and you will be reset to -0- again. Your orange light should now be
of bulb warning light? Hold down the mute button on your remote and the enter button on tv at the same time for a few seconds, you should get a screen prompt asking if you want to reset the lamp timer
...light is a bit annoying to see. Frazer Resetting the lamp time After pressing the "?" key on the remote control in Stand-By mode, press the "9876" and press the "OK" button. And then three LED in the ...
...TV turns on but no picture or sound. when i press power button on the remote control orange light flashes for about a minute and goes back to red. TV won't turn on. It iz frustating me a lot ay
...The Lamp hours reset menu should appear on TV screen Press select on remote (large button in the middle of four arrow buttons Press select button again, hours should reset to 0 and light will go ...
light you have to hit enter on the tv and mute on the remote at the same time for 5 seconds, then a menu will appear to either see how many hours you have left on your bulb or reset the light. Hi. I'm
70 questions posted
Usually answered in minutes!
1,031 Questions
445 Questions
373 Questions
357 Questions
327 Questions