Samsung HCM422W 42" Rear Projection Television "flashing blue light dlp" Questions

...blue and yellow lights flashing on the front of the tv below the screen Most likely the lamp is dying. Try replacing the lamp before calling a repair tech. What does the Owners manual say about the ...

...sound is okay, then lamp is okay, the blue light in the front is not flashing. I open the back panel then turned on the tv and i see the lamp is on but no light on the projection light. Thanks ...

...blue sreen comes on then tv shuts off. My status light is flashing and I cannot get an indication that the TV is actually on. There is no sound. I cannot get any display whatsoever. The blue light ...

...flashing a green light and gos to the blue welcome screen,does anyone kno what wrong with my tv????????? The lamp is new and each time i go to turn it on it goes to the blue welcome screen then shuts ...

...blue and white wire. If your tv turns on then that is your problem. Its cheap too. Here were my symptoms..1] Turn tv on 2] Bulb would light up..(which eliminates the ballast) regular picture would ...

...light flashes on the power button (blue lighted button) we we get sound but no picture. Only the picture goes off. Replace Lamp Call Mats 1-800-628-1118 no sound no picture just blinking red light on ...

blue screen, it always just shuts down. I downloaded the Mitsubishi software upgrade, but it did NOT solve anything. Thanks Hi Mike,May I know if the LED light at the front panel has a pattern of 

...blue to green in a flickering action, then once tv has been on for a short while the icon check fan #1 comes on and the tv will shut off. I bought this tv from bestbuy in 2008 You have 2 problems. ...

...flashing blue light 3xs then resets no screen or noise I suspect that in this case your power board has a fault and will need technical intervention. NOT A DIY But first try this, its a hard reset. ...

...blue mitsubishi welcome screen but goes no further. Green light by power button flashes rapidly. When put into code read mode the light blinks code 12, (normal). As per other advice, i have already ...