Samsung DLP HL-P4663W 46" Rear Projection HDTV-Ready Television "philips color wheel problems" Questions

color wheel is coming on. I don't want to go and buy another bulb and still have the same problem. Is there a magic reset button or any idea why the lamp won't come on? I had a similar problem with my

...COLOR WHEEL for less than $120...AND where to SOURCE the PART. Hopefully this is Helpful for those who 1-- Unplug your TV and disconnect all the cables at the rear of the TV. You then want to remove ...

...philips screws secure it to the frame of the engine. Remove the screws and you should be able to pull the shroud up and away. The Color wheel has two cables coming out of it; one is a 3 or 4 wire ...

...color wheel it should be obvious upon removal. This requires major disassembly but can be handled by a cautious and alert person with a long handled philips screwdriver. Magnetic preferred. If you ...

...philips screws secure it to the frame of the engine. Remove the screws and you should be able to pull the shroud up and away. The Color wheel has two cables coming out of it; one is a 3 or 4 wire ...

Philips lamp. Check out FixYourDLP blog for more information as there's lots o interesting reading there The lamp drive Circuit. There is a Ballast that could be bad. The ballast is located here: http

...color_wheel_in_dlp_projection_tv which explains what you need to do to change this unit and where to get the parts. Thanks for using FixYa and for the great rating. hardrocko Had my head in the back ...

...color wheel about 7 months ago it was was working great with nearly 15,000 hrs on the orig Phillips bulb. Last week there was an electrical storm - a BR breaker released and the TV went off - nothing ...

...Philips dlp60pl...the picture flickers and the color turn red to green then back to normal color, could this be the bulb. No.Do the tv pictures colors back ground flashes black and white when this ...

...problems alway causes by a dying colors wheel that design into it tv.Which the colors wheel it is warp worn out and spinning off of it motor mount axis to cause grinding noises and tv colors to mess ...