Samsung HC-P4752W 47" Rear Projection HDTV-Ready Television "trouble shoot tv picture" Questions

...trouble shoot it if you don't have a service manual for your tv I will post a link where you can get one plus free online tech support to help you troubleshoot this problem ...

trouble shooting.Now TV not able to see pictures. Whenever turns it ON no picture and Standby/Timer LED blinks. Tv have convergence problems first,fix the convergence board first.The tv have mis R,G,B

The tv must replaced the FBT,it hard and dangerous to do,if never done it before.Hire a tv shop tech. to rplaced FBT,might need to trouble shoot on the deflection board also for other parts also burns

...convergence is controled by three cuicit boards in this set. Setting the convergence on this set is tricky. try autoconvergence see how far it gets. let me know and i help you trouble shoot ...

TV the picture blinks off and on with nothing plugged in the picture stays on and the sound is fine. Please advise me on any trouble shooting techniques you may have available. Thanking you in Advance

...tv model number 9p5534c103 and there is no picture or sound what do i need to do and how much will it cost There is really know way to determine cost. most repair shops will charge at least 100 ...

...it's a 1080p cable, and my tv is 1080i I had the same issue. I think you have to reset your PS3. I don't remember how I fixed it but I did find the anwser in the PS3 user manual "Trouble

trouble shoot the amplifier section which have bad capacitor or the amplifier get bad. if you don't have enough knowledge in repairing in electronics as will as tools and device as my advice just send

...tv i believe it is. i turned it on and it made a noise i have sound no picture when i turn it of the statues light stays red can anybody help me in determing what the problem is. neeed the model ...

...with tv is convergence-unit is made by samsung.You can eithor replace the convergence board or trouble-shoot it yourself. gonna need to replace both ics STK392-040-then check all the 3.9 ohm ...