Samsung HLR5667W 56" Rear Projection HDTV "power" Questions

new lamp, new color wheel installed successfully.. tv powers on for about two minutes and powers off, all fans have power, color wheel has power, no power to the lamp? fan on the lamp power supply has

Samsung HLN617w won't turn on We experienced a power outage, but the t.v. was not on at the time. The t.v. is connected to surge protection. When power returned, t.v. had three lights on solid in ...

no power DLP is notorious for losing power. Need new power converter located in panel on rear. Good TV by the way. Just keep all accessories away from it due to DLP power interference.

groaning sound when powering on colors are wavy. power off and back on and picture is good for 1 hr or so.when powering off groaning does not stop. unplug power and it stopd The color wheel needs to ...

...lamp & temp blinking, replaced lamp. TV blinks whether or not I have the lamp in. Pressed the power button on set and nothing happens. Does this mean I need to replace the power board? Look for ...

I have a samsung hl-r5667w model, when power is applied tv makes a clicking sound and no sound and no picture but the power LED is on.Bad power supply? Most likely the powe supply is bad you can get a

tv have a humming sound, sounds like a soft power saw running. Possible that the noise can be associated with a faulty frequency in the switch mode power supply. So if you see a blurred or warbled ...

...minutes, now TV is on but can't see anything and it won't turn off/on with remote or by pressing power button. please help!!! I have to pull the pull the power to turn off. Thank you, George take ...

...as is. I'm familiar with this type of tv as I own a Mitsubishi wd-52628. Problem:Before even powering-up the tv, I removed the lamp checking if it appeared ok. It looked fine. I put it back in ...

TV Turned Itself Off - Now - No Power No Lights Flashing While watching TV the set automatically shut itself off. Went to turn it back on with the remote with no luck. Went to the TV and tried to ...