Samsung HLR5067WX 50" Rear Projection HDTV "stop standby light tv" Questions

...standby temp light on the front of the TV is on all the time. Thanks for any help Mike One Rev The lamp probably needs to be replaced, ...

...Standby/temp light, Lamp , Timer light flash then you need to replace the bulb. Standby/temp & lamp indicators are flashing but not Timer. Is this a simple bulb replacment even if Timer light not ...

...shuts off. The lights on the front are in the STANDBY/HEAT. The Color Wheel, Fan2 and Lamp have all been replaced. Suspect number one is not fan, lamp or Color wheel--optical light engine with dmd

...standby light it will be blinking so many blinks and stop and then blink again. If so this is a code that you can look up on the Samsung web site and plug in your model and it should tell you what ...

stop it using the remote, the only way was to either unplug it from the wall or use the power button on the unit itself. I had a look yesterday and when I pressed the power button on the unit again it

...STANDBY THE SET IS TWO YEARS OLD The squealing noise is a defective color wheel. When the color wheel does not get up to speed (or stay up to speed) the set will shut down with the blinking you ...

...tv started humming/grinding loudly and the picture went sorta black and white. i turned it off then turned it back on but the sound and video were gone. now when i turn the set on i hear the startup ...

standby, green-timer, green-lamp) start flashing and they don't stop until you try to turn it on again and then and only then do they stop. Then the whole process starts over again. Any suggestions on

...light comes on again and the screen stops pulsing. When it is going through this cycle, pushing the power button doesn't do anything. The next day or even sometimes later in the same day it will work ...

...and causing problem. standby button(grn) is flashing when tv is turned on than red lamp light flashes.....what is it?? The tv LED lamp life span is over.Replaced the lamp ur tv should work