Samsung HLP4663W 46" Rear Projection HDTV "conversion ic chip" Questions

...MOSTLY IN BLUE AND YELLOW, AND THE PICTURE DOES NOT FILL THE ENTIRE SCREEN. HELP!!! sounds like the conversions is out you maybe able to resit the conversions in the menu or you will have to replace ...

...outlines on the left side with blue, red and green around them? The right side is perfect. the conversions could be out and need to be re a lined you should be about to do it through the menu.

...conversion chip located on the 5 jcv tv. colors and shadows and top loops down in picture I want to replace my conversion chip on my t.v. the convergence chip is written stk392--- for example THESE ...

IC itself. I still get the same thing, any suggestions? the conversion chip is powered by seperate power from the transfomer + -- volts here is I believe what your conversion chip # is stk392-110t and

conversion IC's and settings! but if you never went into the settings and never changed anything then resistors on the conversion IC's chips are bad and you may also need new conversion IC's this will

screen has blue/red lines across you need to have a conversion chip or chips replaced as well as some resistors connected to it. but you should have the vertical deflection IC replaced as well

...conversion IC chips control the horizontal , vertical ,and color alignment , but there is also some resistors on the conversion IC's that have been causing the set to look like they need the ...

...lines curved. Would look like a smile on the top and a frown on the bottom. If so it is likely the conversion amplifiers have gone out. Without your model I can't say for sure, but Toshiba usually ...

...CONVERSION CHIP PROBLEM. SCREEN HAS BOWTIE EFFECT AND CONVERGENCE IS ALL WACKED OUT. CHECKED ALL "D" BOARD FUSES AND REPLACED CONVERGENCE CHIPS. PROBLEM REMAINS THE SAME. DOES ANYONE HAVE ANOTHER ...

...when i turn the tv on, it stays on for 5 mins. sometimes less, then the screen goes black while you can still hear the sound. any solutions? this is the conversion IC chip , it needs to be ...