Samsung HLN5065W 50" Rear Projection HDTV-Ready Television "dlp slow turn picture" Questions

...broken or missing pieces and it is the problem---The wheel is directly connected to the set---set will detect if wheel not moving or moving too slow etc and almost instantly turn the lamp

DLP samsung TV that recently started turning it self off after just a few minutes of being on. When it turns off about ten seconds go by then you hear a click and the two green LEDs on the front flash

...DLP sets) will try 3 times to get the lamp lit before the microprocessor will give up and then the 3 lites on the front will blink indicating a LAMP failure. This process takes about 1 to 2 minutes. ...

...DLP model HLP5063WX/XAA. - It starts after it's been running, an hour approximately. Noise can change when screen goes dark, or if set is turned off and then back on in short timeframe. ...

turn the tv on it will start to make a moderate buzzing noise with which after 5 minutes the buzzing noise gets very loud, the picture is absolutely perfect with the occasional shut-down, so i&#39

...DLP projection that has a ballast and color wheel along with a lamp. The three flashing lights on the front are a diagnostic code. The exact meaning is listed in the owner's manual under ...

...DLP Model HL-R5076W (model code HLR5067WAX/XAA) type number AT50L6 made in August 2005 (bought new) its worked fine until recently when it started to have these symptoms... On an analog input (DVD ...

dlp .the issue I have is it turns on picture is still bright.It shuts off after 2 min 10 min 30 sec it varies.sometimes it stays on(rarley).alson middle bottom looks like the pic is brighter in darker

...DLP HDTV, Model 60PL9200D/37. When the power is turned on, the only thing that comes on is the blue light on the front of the TV. It displays 6 slow blinks, 5 fast blinks, 6 slow, 5 fast, etc. What ...

...DLP HDTV playing normally (picture looks bright and clear) then after a couple of minutes of use the power cuts off and the error lamp indicator red light on the front display panel stays on (no ...