Samsung HL-P5063W 50" Rear Projection HDTV "new tv picture fit" Questions

...TO BE REPLACED, BEFORE THE TV WILL DETECT A NEW LAMP HAS BEEN FITTED, YOU NEED TO RESET THE LAMP USE TIME, OR THE TV WILL DETECT THE LAMP, BUT IT WILL NOT WORK BECAUSE THE LAMP USE TIME HAS

...TV and turning it back on if started to work. if it doesn't then the Trying a new lamp first is reccommended. After all, you will need another lamp eventually. Samsung Parts ...

tv. The fan goes on but the lamp doesn't Check the lamp contacts, eventually remove lamp and fit back in, chack that you did not burnt new lamp when mounting it in, you need a multimeter to test lamp.

new one back in and pay attention to the way the metal goes and press in a steady motion down slowly and it will ease in there. 7. Replace the lamp at the same time, and when you do and it (lamp) does

picture is still dark after new bulb when you fitted the new lamp did you reset the lamp burn time?? if not the tv still thinks it has the old lamp fitted!!! clever these tv's

...new lamp. TV tried to turn on/off Just replaced a new lamp. TV tried to turn on/off several times (here clicks) without picture. then both green and red lights flashing continuously. please help. ...

sony rear projection tv no picture you need a new video board i have one that might fit cody 573-433-1925 you need a new video board i have one that migh tfit cody craddock 573-433-1925

...Original Hitachi 55VG825 Remote Control $61.95 new - 1-800-Remotes HITACHI 55VG825 LCD PROJECTION TV REMOTE CONTROL $44.95 new - NewRemoteControl.com Hitachi Clu-3851wl Remote Control Part # ...

..."OEM" listing and it says "Philips" or "Osram" then those are the quality lamps that are quality made and will last and your tv picture will be brighter like it was new again.. I hope this helps

...tv and isolate the interference. good luck! I installed new electronic ballast in some florescent lights located in a room directly beneath the television. Apparently something in the ballast caused ...