...blank (black). The TV is on (like watching a dark room with very little light in a movie) as I can see a glow throughout the screen so I presume that the lamp is still working, there are no lights ...
...blank screen. Then after waiting 3 minutes, the tv sounds like it shut off and the red light comes on. I turn it on again and it works fine. HLP, HCN HL-S The Start-up Problem or/and 3 LEDs in the ...
...Led TV says it gets no signal. The TV worked fine one day then the next day when power was turned on, it has a blank screen with the message there is "no signal". I used all the same wiring and ...
...blank. The power light will continually blink 4 times until the set is powered on. If the set is immediately powered on after it problem occurs, it will work fine for a few minutes and then the ...
...LED blinks 5 times you have a AKB error. It is caused by the CRTs trying to balance the color, and failing. Its an annoying problem that happens when the CRTs get old. If its just beginning you can ...
...blank. The sound is still ok. The diagnostic code is AKB 1 and HV 1. The Red LED on the font of the tv blinks 5 times. Please help. I contacted Sony by e-mail and they only gave repair tv services in ...
...blank screen (all black, just having it on an unused video input works great) and then slowly turn down the lower right knob (red screen knob) until the lines go away. Then put the TV on a picture to ...
LED D940 was unlit? you said that the "protect-mode" D912 was flashing.... Check whether the small blue 2KV scan disc cap hidden under the larger ones had arced internally: C707 "102 / 2KV"C707. Thanx
...screen. You see that the LED is blinking 4 times....This would tell you that you have no vertical and that is why the video is muted. If it was blinking 6 times, you would know that you have a ...
129 questions posted
Usually answered in minutes!
445 Questions
373 Questions
297 Questions
280 Questions
244 Questions