Hisense 50 Class 1080p LED Smart HDTV - 1920 x 1080, 120Hz, 2000000:1 Dynamic, 4x HDMI, Built-in Wi-Fi 50K610GW-RB - 50K610GW-RB "keep unplugging tv work" Questions

...no problem for 12 months, i have accidently unplugged the mains, and now the tc keep turning itself off, i have the same problem with lg 41'. i hed tv for 10 months. what to do. i pay tv 1200$ plus ...

...refresh rate on your tv? 60 or 120hz? if its 120hz, then its more then likely the digital broadcast, if its 60hz I think its your tv can't keep up with their signal that may be at 120hz. Make

...tv has been acting crazy. It would turn on, but channel keep chaning up by itself and i cannot control it. It will not stop at one particular channel, it would just keep chaning channel endlessly. If ...

55" vizio keeps losing color. when i watch a dvd no color issues. is this a tv issue or a cable issue I've done the cycle thing. tv off , hold button for 30 sec, unplug for 5min. sometimes it ...

my tv keeps switching itself off check on the power supply board you should find blown caps,replace them and it should work....please note there is voltage in the tv even if the tv is unpluged....

...Anyway it was working fine until my daughter got mad and hit multiple buttons on the tv now it keeps flashing different colors. It wont even shut off until I unplug it. The TV remote control can ...

...tv. I ended up unplugging the TV from the surge strip. Waiting about 20 - 30 seconds. I also pressed the power button to "drain any remaining power". I then plugged in the TV and it started to work ...

you might have to take the back off the TV and unplug the cable feeding the external button panel on the TV and only use the Remote (for safety, rememeber to unplug the TV while doing any work on it)

TV keeps scrolling through the channels and won't stop. I cannot use the remote. I have unplugged everything, and I took out the batteries in the remote--nothing worked. To turn off the TV, I have to ...

Unplug the cable and using the menu on the TV, update the firmware. After updating, hold he exit key down for 30 seconds and reset the TV. If that does not work, you may need your power supply changed