Question about Emerson Computers & Internet
...LED on, but no picture - Unusual colors and/or lines The primary cause of LCD TV and monitor failure is caused by faulty capacitors. You can examine the capacitors in your LCD TV or monitor and ...
Question about Funai Computers & Internet
...led tv was working perfect now all of a sudden its froze and stuck on hdmi i cannot do anything help please its only a year old main board is bad, replace the tv. funai tvs are junk Try to powercycle ...
Question about Element Electronics Computers & Internet
...TV, it's above the Source button. On the remote it's to the left of the 4 arrow keys and slightly below the left arrow.) Navigate to Channel with the Up/Down arrows. Press the Right arrow or OK to ...
Question about ViewSonic Computers & Internet
...button on the remote control that came with the TV one of the menu options is to set the Parental controls. The user manual that came with the TV is not very helpful in this matter. 0000 is usually ...
...button on the TV (to the left of the power button) or the Input Select button on the remote. Use the up/down arrow keys to navigate through the source list and press Enter to select that choice. (On ...
how to reset a sharp aquos? How get a factory reset in this TV? Hold VOLUME UP and CHANNEL UP buttons in while plugging set into power. TV comes up in service mode. Press CHAN + or CHAN - to select an
...LED TV Click where it says manuals and literature. Download the manual it will be in there. Generically speaking, you would press a menu button and look for a settings screen where you can change the ...
Question about RCA Computers & Internet
...get a picture. I use a direct tv box. I turned off the tv by hand, not with the remote. Hit the wrong button, now no picture. I have direct tv box. Change your inputs switch until picture
Question about Seiki Computers & Internet
LED TV - replaced power board but still no backlight? LED backlights do not seem to work. A friend gave me a Seiki 50" TV that he said stopped working. I performed the 'flashlight test' and determined
...TV have any standby light etc, if so power off at the wall and leave for 1 minute the power back on and watch the standby LED it may or may not blink try to power on if the light blinks this may be a ...
13 questions posted
Usually answered in minutes!
8 Questions
2 Questions