Honeywell HS1750 Stand (Pedestal) Fan "grills" Questions

Trying to remove service grill for Nutone QT140L combo fan/light The service grill has not been removed for 10 years and I need to remove it to replace the light and clean the grill. I checked the ...

...the screws back into place..... Also...the screws are on the back of each fan head between the back grills....it's hard to see...but after CLOSE inspection you'll see them. Wash the front grills in ...

I cannot get the spring clips to work in the slots that the diagram shows, therefore I cannot get the grill in place I have the same fan. Not easy to do, but squeeze the two spring ends together and ...

the fan won"t work after taking the grill off i took off the front grill and cleaned it and now the fan won't work. I checked the plug but thats not the problem and i put the grill on like it suppose ...

How do I remove the light from the ceiling? Sent you a question on this but did not receive a reply. If you are talking about removing the grill/globe to change bulbs, it just pulls down from the ...

The light and trim ring will not connect to the vent box, no instructions came in the box, i went online and the instructions did not tell you how to install the trim!! The two "V" springs on the ...

need to clean..............how do I get it apart to clean model 280SS Have had this model for quite sometime and it deperately needs a cleaning. THNAK YOU! There are four clips the hold the grill to ...

how do I remove the cover The whole cover/grill/globe pulls straight down to expose the bulbs. There are two heavy "V" springs, one opposite the other, that hold the grill to the fan box. You need to ...

...little tricky. Everything snaps or twists together. Press a little on the front and back of the fan grills and twist lefty loosy to open. The blades are an easy detachment, just pull them out easily, ...

I have an older Vornado 280B (it looks just like the current 730 series with the small stand). I've been able to remove the front grill & clean it and the blades, but now I'd like to remove the ...