...left it unplugged for about 15 min. Same problem when I plugged it back in. Could the move 350 mile have caused this? Also what kind of cost would I be looking at. This set is 4 yrs old. try this ...
...back of the TV. I don't advocate the Protection Plan but I was glad I had it. Cost me $499 in 2004 expiring this November. He explained that it would have cost me out of pocket $218 for them to come ...
back opposite the side of the inputs), the tv would turn on like it did if I didn't have the convergence board in. My question is basically if I get a new convergence board, will it solve the problem
...back panel and the page size aluminum brace, it has two large square cut outs. The shiny silver box under that brace ( maybe 10" x 4") is the ballast. That is typically the next thing that goes out. ...
...350 if it is a fan and over $1000 if the optical engine is found to be the problem.About the only thing I can suggest doing yourself is taking a look through the back of the unit and making sure all ...
350 for this repair. This is a very common problem with rear projection TV sets. There could be other parts that are not within factory specs. The only way to be positive of the problem is to have the
...back in. Could the move 350 mile have caused this? Also what kind of cost would I be looking at. This set is 4 yrs old. Toshiba rear projection with blinking LED = 1) Open micro fuse ...
back) . Missycam70 unfortunately the service man was correct if he came out and the set was working there would be nothing he could do. you have to look at it from his side, if he came out and put all
...back or look for a replacement. Repairs should cost you 350 to 450 at shop and 150-250 at home subject to the availability of parts. Cleaning it just a stop gap measure and not a lasting solution. ...
118 questions posted
Usually answered in minutes!
405 Questions
364 Questions
299 Questions
263 Questions
243 Questions