Honeywell HZ910 Compact Heater "thermostat keeps turning itself" Questions

...built in thermostat. When reaching temp unit shuts off and will not refire by itself. I have to turn unit off and back on to get it to refire my ready heater pro115 model numberr115 keeps shutting ...

...keeps blowing fuse when first turned on I connected the thermostat on a short piece of wire to see if a screw in the wall was shorting to cause the fuse to blow immediately and it still blew. Blower ...

keeps running til it starts blowing cold air again i have to manually shut the switch off and turn it back on and everything repeats itself again...this is a model AGU10016A COLEMAN EVCON FURNACE WITH

thermostat to turn up all the way 4. There is no pilot light 5. It's doesn't use gas, It's electric! Here's a link to the product http://www.dealtime.com/xPF-Honeywell_Radiant_Heater I would just like

...pilot stays lit by itself without you having to hold down the button then advance the knob to the ON position. Then go to the wall thermostat and turn on the heater. HOW IT WORKS: WILLIAMS WALL ...

...thermostat is quickly just turning itself off and then on again. Any thoughts on how to fix this? Hi the problem you have is your heater is cutting out due to the over temp switch getting to hot the ...

...Thermostat has two wire red and white that goes to unit. I keep repeating cycles to turn on pilot and same thing repeats. I have turn on the little screw next to the pilot knob to allow for more gas. ...

...thermostat-bound, and I have found that they simply will not burn continuously, like a blue-flame heater. Try turning up the setting--this will make it come on/off more often, effectively heating at ...

...thermostat itself malfunctioning, you can pick up a cheap one at a local department store and installing them are fairly easy, especially since its mostly color coded. Some thermostats have an ...

keeps turning itself off even though I have the thermostat set at 70 probbaly a limit switch,not easy fix.got to open it up, short switch and run awhile if its ok then replace limit or risk fire.if it