Toshiba 55H70 55" Rear Projection Television "causes clicking noise back" Questions

...clicking noise followed by 4 or 5 louder clicking noise which sounds like heart beats The clicking you hear is probably caused by a relay that controls the incoming AC to the main power supply. This ...

...clicking noise RCA big screen tv 52 inch The clicking noise is caused by the relay. This is a fail safe to prevent possible fire in the unit. It is heat sensitive and detects some overheating ...

...CLICKING NOISE IN THE BACK OF THE TV AND THE TV WLL NOT TURN ON. WHAT IS CAUSING THIS AND WHAT IS THE SOLUTION I have P46733AT with the same problem. I ordered schematic and now looking for flyback + ...

...clicking noise coming from a small white box with copper wires inside of it. It's on the left handside when facing the back of the T.V. Do you know what the problem is thanks. Check on the bottom of ...

...noise and then then nothing. No picture no anything. I opened up the back to see if i could figure it out and when you try and turn the TV i hear the first click then the second click then a little ...

I have a 20" rca truflat tv with the fpl on and can't get the tv to turn on Too general. Does in make any noises (like a click or high pitch squeal)? When you say "fpl on" is that a fromt panel ...

clicking noise is the problem See attached photo: you have a bad color wheel----it turns at about 12,000 rpm and bearings in the tiny motor go bad.High pitched or fan like sound is classic symptom.The

clicking/chirping noise for about 5 seconds before shutting off, one stays on continuously, and one doesnt turn on at all. there is another red LED that stays on right near the outside of the backside

...noise coming from the back of my Samsung HDtv progressive monitor immediately after being turned on. The noise remains 98% of the time until i turn the tv off. After powering off, the noise stops ...

...light will come on and go off within two seconds and i hear a clicking noise in the back when it trys to turn on then off it will need to be checked by a tech to determine the exact cause ...