Toshiba 42H83 42" Rear Projection HDTV-Ready Television "screen jitter" Questions

...screen to jitter Mitsubishi VS-70705. What causes the image on the screen to jitter horizontally? It seems to get worst as the TV warms up. Sounds like bad convergence ICs. They are complicated to ...

screen Our rear projection Toshiba's picture has started to jitter and shake. We're also getting double picture on the right part of the screen. We'd appreciate your help. Thanks. Chassis will need to

jitter and tearing on bright pictures My mitsubishi VS 6061 tears from the left side of the screen on bright pictures, and the vertical hold will jump on white screens. Any ideas? 1. VERT JITTER/HORZ ...

Issues with the big screen We have a rear projection big screen TV and the proublem started mild. the TV jittered a little and then would go away but only did that if the tv was on for a while. then ...

...jitter at top of screen-intermitant- need soliution Mitsubishi vs-50607 IF you would like help diagnosing your set. Go to the enclosed link. They have the service manual for your set and offer ...

...jitter lines across the screen more often than not and the bright comes and goes what do I need to do to fix it I would hate to get rid of the TV I just bought it JVC AV48P776 Jitter and Brightness ...

...TV that started showing green vertical lines with a line flashing continously across the screen. Turned the TV off. When powered on again, the TV now has vertical jitters on the picture. ...

...screen shakes vertically for several hours before settling down. The TV is a 51" Sony rear projection TV model # KP-51HW40. Any help is greatly appreciated. Thanks, Marc. The jitter is called a ...

MITSU VS 50705 SCREEN JITTERS WHEN COLD.STARTS AFTER A FEW MIN'S OF WATCHING,LASTS FOR 5 MIN'S,THEN GOES AWAY COMPLETELY ?? set tv on fire,then threw it down the stairs... now,why would i tell you how

convergence adjustment isnt working, the screen is jumpping/jittering This sounds like convergence output IC problem. convergence board would have to be removed - remove and replace 2 STK IC's and ...