Toshiba 51H84 51" Rear Projection HDTV-Ready Television "ic regulator tv" Questions

...Regulator IC part number. I want the regulator ic part number but can find it. Where is it located? There are many regulator IC in TV you can find it easy the commonly used are 3 pin part number is 4 ...

regulator IC, part number AA13-00105A. If you locate the convergence board, unplug the connectors, and see if the set will come on. if the set does come on, replace both of the STK convergence IC's at

rr.com hi there, could be regulator in power supply,there are like 3 ics in charge or the regulation,ask him to get schematic for this tv and find regulator ics one ar more of them could be bad,thanks

...colors running together. Thank you, Donnie On board above your deflection board there is a Black IC which is the regulator IC STK730-010 or020 Call Mats for Part 1-800-628-1118 go by number on the ...

...IC. I call it the powerline regulator. And in one case the older Sony Projection TV had an audio output IC with a standby built into this IC. So,this advice is refering to a standby IC. And this IC ...

TV problem Voltage at pin 1 of IC951 is 1.7 vdc. Voltage at pin 4 of IC951 is 15.8 vdc. Does that tell you anything? REDCAT55 Over Current Protection Pin 1 of IC951 is also the Over Current Protect ...

...IC Regulator 9v supplying the video board. If the green light on the front is blinking then powering off it is one of the 7 capacitors and you should just replace them all, 30-35 bucks. If the power ...

...regulator IC, the STR-X6456 regulator IC to go bad for starters, the flyback transformer goes bad and takes out the horizontal output transistor sometimes and then blows the main 10 amp fuse. I have ...

why is my tv in 3D? The convergence is regulated by two ICs. When the convergence ICs become faulty you get colors not matching and shapes show kind of colored halos that may resemble a 3d effect.The ...

...ic are the most likely gone bad however it could also be that you lost power regulation....or you have what seems to be excess Hi Voltage or arcing Now the regulator could be at fault or your SENSE ...