Question about RCA Televison & Video
...discharge the final anode before remove the anode cap. To do this, connect one end of the multimeter probe to the tuner cover or at any ground chassis. Slowly insert the other end of ...
discharge to avoid risk of electric shock.It is done by creating a path of conduction from anode cap to chassis ground. 2.After cleaning the anode cap and the CRT surface.Attached the anode cap to the
...at that point will hold over for hours, even after the set is switched off. Anode must be well discharged before handling the anode cap. A well experienced on only can do this. Do it without any ...
Question about Disney Televison & Video
discharge the final anode properly before remote it]. Sometimes LOT {line Output Transformer} might be repalced. Picture of the LOT is attached here. You can see the final anode cap,
...anode connector for any reason then discharge by inserting s screew driver blade with a wire and crock clip attached clip to braiding on crt bulb> if a fuse is blow find out why before replacing ...
...discharge tube or do i need too? i am trying to fix the sony kv32s40 32" tv solder problem i have taken the cover off the back thanks [email protected] discharging the tube by putting the screw ...
...anode it is leaking you have to discharge the high voltage from the anode cap,then take off the cap clean the area with alcohol and put some red or clear silicone on the cap and anode connection ...
disconnecting TV anode Now that I have discharged the CRT, how do you remove the red HV anode lead and rubber cup from the back of the tv?. Do you lift it off or pull it horizontally or perhaps ...
...discharge the anode because it behaves like a battery and will hold the charge for several months I have not repaired this particular model. I don't believe the flyback is bad. If the fuse is good, ...
...discharge the high from the tube,you do this by getting a alligator clip with wire attach clip to a ground wire on the back of the tube attached the other end of the wire to screw driver gently push ...
11 questions posted
Usually answered in minutes!
405 Questions
364 Questions
299 Questions
263 Questions
243 Questions