Toshiba 27A62 27" TV "legs" Questions

Ad

Question about RCA Televison & Video

1 Answer

...you pull the board out safely, do so. Find a red coil, location L14401 and remove this. Scrape the legs of the coil to remove any oxydation. Remember just the two legs, scrape carefully. Now on the ...

Ad

Question about RCA Televison & Video

1 Answer

...for a 3 legged transistor on a metal heat sink and put the multimeter in diode scale. The outer two legs will always read 0, but the middle to outer legs should NOT. If it does,then the horizontal ...

Ad

Question about Panasonic Televison & Video

1 Answer

...401] on the board and its number is LA7840. Just look for any loose soderings around its components legs, and the solderings at the IC legs, which has 7 of them. The IC stated above will be screwed ...

Question about Televison & Video

1 Answer

Thanks for your help, I have a Sanyo AVM-3289G Television that I am trying to repair. As the plug is being inserted into the AC outlet the polarized leg sparks. Once plugged in there is a faint, slow ...

Question about Philips Televison & Video

1 Answer

...transistor,one for y and x axis,check them both if they read 0 then they are shorted,note,the two legs on the outside may read zero,thats okay.the middle to outter reading should not read zero. if ...

Question about Toshiba Televison & Video

1 Answer

...usual). Now find the speaker wires, and follow them down to the pcb, and look for a chip with 7/8 legs then measure the voltage on all of its legs, you should get 8v to 20v on one pin and half of ...

Question about Sony Televison & Video

2 Answers

...main board. I would take a look at the color crystal. This crystal is a small silver box with two legs and may be next to the jungle IC. This two legged crystal in some cases have had bad grounds. ...

Question about Philips Televison & Video

1 Answer

...for low ohms like 1.0 or 0.9 or anything close. Switching leggs back and forth. If all three legs are shorted then replace. but in this one 2 can be shorted and still be good, just depends on ...

Question about Emerson Televison & Video

1 Answer

...line on the screen. There are mainly two reasons for this fault. One is bad soldering at the legs of the vertical output Ic, and the other is Vertical Output Ic failure. You just open your tv, ...

Question about RCA Televison & Video

1 Answer

...have a new one coming. I have also noticed that a dime size disk, appears to be solid with two legs soldered on, it says 100-o1a and 81775 or 91775 the legs have let loose, is it some sort of ...

Not finding what you are looking for?
Toshiba 27A62 27" TV Logo

10 questions posted

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...