Toshiba 32A33 32" TV "power crt mike" Questions

...thinking it is possibly the power supply, did you attempt to replace yours? Thanks Mike Ok I solved my own problem and posted the results here, http://www.fixya.com/support/t1692655-sony_kp_53hs10 ...

...power outage. Now clickes when turned on and light flashes 5 then 3 times. and does not come on any ideas thanks mike flashes means cannot detects video signal. please apply fresh solder to CRT board ...

mitsubishi power problem turn on power, light comes on for aprox. 2 sec. then off. did self test and got 2blink pause 2 blink please help if you can thx, mike turn off sleep mole

...my philips model # 20pt3732 not starting up no horizontal drive coming from tda 8841. Mike, First check out the voltages in the power supply start up circuits. You will need a schematic. good

...chassis TAC9307, no start, but relay 'clicks'. No obvious electrolytic capacitor failure but power supply C801 (470 mfd, 200 V) replaced, no change. Relay picking usually means the low voltage ...

...power led. i think the problem might be an ic chip (str z4214) but im not sure as im only a shade tree electronics guy. any suggestions would be greatly appreciated. thanks mike. check your horonital ...

power supply part- to make a CRT tv like your RCA36 incher- which is a beautiful machine- I have the RCA/PROSCAN 36 incher-LAST longer...You should always wait 5 min between turning it off and on. Don

lo conecto a las entradas vid 1, vid 2, F front y ninguno funciona. It mike have got hit by a small power surge and if you unplug the set from the wall for 40 Min., then it should reset back to normal

...the TV should have turned off and if not after trying the two 3 digit codes I will send you a link for a Power Scan; http://www.dishnetwork.com/SupportSection/power-scan-instructions - Mike

...Mike Houston of DISH Network. I see you are looking for the remote code toyour Prima TV, we do not have the three digit code at this time but we have away to program the remote to the TV through a ...