Sony PlayStation 2 (PS2) Console "ribbon spindle working" Questions

...spindle as you will start the laser. this is for your safety. then, if the disk does not spin, then you can try replacing the laser. or at least verify the ribbon cable that is hook to it. if the ...

...spindle motor. If the laser doesn't work after cleaning,then replace it either professionally or with someone who already has done it before. If the laser doesn't move at all,or even pulsate a beam ...

...ribbon cable going from the laser to the motherboard is loose or damaged. Lint has surrounded your disc spindle motor and will not allow it to spin. Click on "Repair Directory" at the bottom of this ...

...ribbon intact. Remove the CD tray lid. Polish the Laser lens, and remove any lint or hair from the CD area. Use Alcohol and cotton swabs to clean the laser lens. By the way, Alcohol will damage a PS2 ...

...ribbon intact. Remove the CD tray lid. Polish the Laser lens, and remove any lint or hair from the CD area. Use Alcohol and cotton swabs to clean the laser lens. By the way, Alcohol will damage a PS2 ...

...ribbon intact. Remove the Cd tray lid. Polish the Laser lens, and remove any lint or hair from the Cd area. Use Alcohol and cotton swabs to clean the laser lens. By the way, Alcohol will damage a PS2 ...

...ribbon intact. Remove the CD tray lid. Polish the Laser lens, and remove any lint or hair from the CD area. Use Alcohol and cotton swabs to clean the laser lens. By the way, Alcohol will damage a PS2 ...

...ribbon intact. Remove the CD tray lid. Polish the Laser lens, and remove any lint or hair from the CD area. Use Alcohol and cotton swabs to clean the laser lens. By the way, Alcohol will damage a PS2 ...

...spindle motor, then I replaced the whole laser assembly too. I have removed the anti-static solder point from the laser. I have checked the two trip switches are working. I have checked all ribbons ...

...spindle motor went bad it sounds like. Open up the ps2 and inside of there, you'll see a ribbon for the drive, take it off of the board and then reseat it. Now put the top back on and try the drive ...