Aiwa CR-LD120 AM/FM Radio "setting station" Questions

setting the stations on memory I cannot figure out how to set the stations on the memory. Otherwise the raido works fine. OK HERE'S WHAT YOU DO 1. USING THE UP AND DOWN TUNING, TUNE IN THE STATION 2. ...

station setting begins flashing in the LCD display (G). Continue to hold the button down until the flashing stops. The memory button is now set. 4. Repeat steps 2 and 3 to set the other memory buttons

How to set Stations I am trying to figure out how to set the stations for memory u set up the channel u want with "tun.up"\"tun.dn" press the "mem.ch" for five sec untill it flickers or beeps now u ...

...Setting the Clock 1. Press and hold the CLOCK button until the hour begins to flash 2. Use the left arrow and right arrow buttons to change the hour. 3. Press the CLOCK button again. Use the left ...

how to set buttons for memory How to set memory buttons To set memory buttons: 1) Tune to the station you want. 2) press "mem" button. 3) press the memory button you want to use for that station (1 ...

did not recieved operators manual with dewalt dc011 construction radio. need to know how to set the select channels. 1-2-3-4 1. Select the Radio Station you want to save. 2. Press and hold the Memory ...

Preset stations How do I pre-set stations? This is how to preset stations on a P2257 Koss: Tune to desired station. Press and hold in the Memory button for a few seconds, then release (the Memory ...

...purchased a dewalt radio/charger through sears, was a close out where had no instruction for presetting channels 1-2-3-4 Not able to set, need instructions. 1. Select the Radio Station you want

I don't know how to save a station I have tuned into the radio? I don't know how to save a station I have tuned into the radio? After you have tuned it to the station you want, hold the button you