Alpine MRD-M605 - V12 MONO AMP 600WX1 RMS 2 OHM Car Audio Amplifier "plug amplifier" Questions

...the back of my radio I can not find a plug that will fit. any suggestions on where I might find this item? hi, if you don't have any RCA plug on the back of your radio you can't plug your amplifier

...plug jensen 600w amplifier? amplifier made by audio-vox, model jpa460, 10 prong socket You will have to call Jensen. They normally don't come with amps anymore as most users prefer the RCA input for ...

where do i plug the rca cables at? there are two different places Plug into the ones that say input, the other ones are to plug another amp into, so for just the single amp setup plug into the input.

...plug that delivers remote power to the amplifier can you direct me to where I can buy or get one? If you don't need the OEM plug, you can use the type of connector used to connect to the terminals of ...

2 sets of rcas and still the same problem Either the source isn't moving signal through stereo/both plugs, or the amp is damaged and will need repaired by an amplifier technician

plug my speakers into my peavey amplifier and turn it on, I get a load hum even if I don't have an input source connected to the amplifier. How do I stop the hum? The type of cable you use plays a big

...amplifier, not a head unit. The point of that is to power the speakers. The output on the head unit plugs into this, and the speakers plug into this. You tune the station on the head unit in the ...

...amplifier There are several options. Take the jack out of the board, disassemble it and remove the tip of the plug. If the tip of the plug is in the top slot, pull the sleeve off of the jack and ...

...plug the RCA cables back, and reset the amplifier. If it goes into diagnostic now, the fault lies in the input, either with bad cables or source unit. 3. If the amplifier seems fine with RCA cables ...