Alpine MRD-M301 Car Audio Amplifier "amp stuck protection mode" Questions

...amp is stuck in protection mode I am unable to get it to turn on an dpower my subwoofers First disconnect the subwoofer wires from the amp, turn the car off and back on...is the amp on? If so your ...

Amp stuck in protect mode. My amp will just go into protect mode then.I unhook the amp and then hook it back up and it works fine for a while. Disconnect all speaker connections and rca cables. Leave ...

...amp just shut off and wont come back on I think it's stuck in protection mode. I've aleady took the entire amp apart and looked over the motherboard checked all the capacitors,fuses, and they all ...

stuck in protect mode The amp will not come out of protection mode. All wires unhooked. even tried alternate power source. A new amp is installed to same setup as this and has had no problems. Help Hi

...amp and it is stuck in protection mode. What and how can i solve this if you amp is in the PROTECTION MODE its means that there some defective part , like for example the main ICs or TRANSISTORS ...

...amp is stuck in protection mode, what are some solutions to this That indicates a short. Either inside the amp or the speaker wires or the speaker themselves are short. Remove the speaker connection ...

...amp lights up but has no sound coming out of it.Is it stuck in protection mode or is it fried? can it be fixed? check you rca in put into the am with out spkr wire connect to amp if protection light ...

stuck in protection mood. ground is fine power lines are fine as well as remote line. changed out the fuses just in case but I still cant get the amp to reset Hello john_hart, Check the speaker wiring

stuck in protection mode tried everything voltage good wires good ground good open/close button dosen,t help me at all love amp please help everything you've tryed is useless(with respect) because amp

...stuck on? Is this because the fuse had burnt? Thanks in advance for your answer The battery is 12 volts and Ohms has nothing to do with your amp installation. Was the amp running and got hot? Many ...