Alpine CDA-7892 CD Player "turn rca radio" Questions

...what cable do i hook my amp wire upto??? The only amp wires that connect to the Head Unit are: Amplifier remote turn on wire to Blue/white at radio and RCA audio cords to SUB or REAR output RCA

...to come from the radio when it turns on, how do I get this done with this type of radio? you need to get a BTL converts your radio into rca jacks so you can control the power of radio and

...any output ?? You hook the amp up to the deck with rca cables red and white. you have output rca on the back of the deck also the blue wire labled remote also goes to the amp to turn it on and

...turn on or Pwr Ant----SPEAKERS----White = Left Front Speaker Wire (+)White/blk = Left Front Speaker Wire (-)Grey = Right Front Speaker Wire (+)Grey/blk = Right Front Speaker Wire (-)Green = Left Rear ...

...turn up the volume of the mp3 player it starts to cut out (from maybe to much power into the rca jacks?)all in all I have roughly 1/3 the volume in aux than I do in cd or radio mode. from what I've ...

...of the two RCA jacks located on the back of the deck. But the subwoofer still isn't recieving a signal through the rca cables. Any Solutions? go into the menu of the radio make sure sub output turn ...

...rca's into the rear. after purchasing this cable, you will have to turn on the aux option in the menu. which you may want to make sure that you can do beffore you order it. 1.with the power on, hold ...

...work since i unplugged the rca wires checked all fuses nothing Radio wont turn on ever since i wiggled the rca cables This sounds like the RCAs themselves are bad. Replace them and you should be

...rca's ground terminal to radio chassis. Should be close to zero resistance. If there is no no continuity there are fusible traces on radios main board that burn open at times when to much current is ...

...sure where you plug in on the radio side is Aux input, most Radio Aux is at the front or come with special connector if it is at the back. Mostly radio back come with RCA is for Line out not Aux