...alinement you will need to install the following kit it comes with step by step instructions. ...
With TV turned off PRESS and HOLD Both CH- and VOL- release when set comes on Now you should be in Teachician Service Menu there you should be able to Do convergence alinement and set Auto convergence
...a way to recall defaults? Sorry there is no reset for this alinement,you probly need your ics replace and complete convergence alinement ICs are STK-392-110s or 150s , I myself replace them with
hi.all the color are not alined Tv have a problems known as a convergence problems,it dead.The tv have colors R,G,B mis alignment,have colors shadows or 3D pictures.The tv convergence board the 2 STK ...
...out of alinement. I did manuel convergence-which let me go up and down, but not side to side. So how would I get rid of the red blurr? You need to replace the convergence chips which have become ...
aline blue grosshire This sounds like convergence output IC problem. convergence board would have to be removed - remove and replace 2 STK IC's and check the surrounding resistors. Shops usually $200-
convergence the convergence is working but looks as if guns are crooked.and colors are stil not alinning. this set is rather difficult to converge.. sometimes almost impossible. technicians ussally ...
Color convergence shake's but does not aline. What convergence chip would that be! Thank you. Every model has different chip sets. Check with www.TvRepairkits.com
...tantus 109cm rear pro tv the red is out of alinement how can i fix this You can get the convergence board from www.tvrepairworld.com your experiencing a convergence failure with the red
my zenith projection tv model R49W36 wont aline the colors green,red and blue Its a convergence problem. You can get complete parts and instructiosn for this fix from www.TvRepairKits.com. They put ...
67 questions posted
Usually answered in minutes!
193 Questions
97 Questions
59 Questions
71 Questions