Kenmore 11206 / 11306 / 11506 / 11606 "beginning sewing machine 20" Questions

Ad

Question about Singer Sewing Machines

1 Answer

...(just 00) on the display, my wife experienced the same problem. There was an internal sensor that was bad. The sewing machine shop repaired with a new Singer part. Part was about $20, labor was

Ad

Question about Husqvarna Sewing Machines

1 Answer

beginning.) Upper thread malfunctions commonly occur if it is not threaded correctly or the thread is not seated in the tension disk properly. Install a brand new needle if you haven't already done so

Ad

Question about Brother Sewing Machines

2 Answers

...machine PRW 6800 was spinning the fabric around. I took it to the repair guy who fixed it on the spot....same thing happened a couple of years later...This time I read on line what to do..just held ...

Question about Kenmore Sewing Machines

1 Answer

sewing machine in 20 years and I forgot the pattern for the top spool. Seems like it made a v pattern and then down through the needle. Can someone remind me? Thanks, all machines thread the same. TTN

...sewing before an issue arises would suggest something with the thread feed, tension, etc. Just some ideas to try... Have you removed the thread completely, RAISED the presser foot, and re-threaded ...

...machine sews for about 20 stitches and then stops. A screen comes up and says Check and rethread the top thread. And the cycle begins again. When embroidering with a hoop, the machine will sew the ...

...machine is out of time, re-threading all threads from the beginning usually resolves the issue. Be sure to ALWAYS RAISE the presser foot when threading. Also, verify that the threads are being ...

Question about Singer Sewing Machines

1 Answer

...machine. ALWAYS RAISE the presser foot and rethread from the beginning. Verify the thread path is correct. Set the tension at the midway point and then tweak it so the top and bobbin threads meet in ...

Question about Singer Sewing Machines

1 Answer

...machine either jams completely after 2 or 3 inches or it sews a seam perfectly. When I turn it over, the seam is a wreck- the upper thread is in giant loops and the lower thread is loose It is in the ...

...machine?It has not been used for 20 years, but seems to sew well. Because your machine is an older mechanical, it most likely would benefit from a thorough clean and oil. Even though it still sews ...

Not finding what you are looking for?
Kenmore 11206 / 11306 / 11506 / 11606 Logo

100 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Sewing Machines Experts

Cindy Wells

Level 3 Expert

6688 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Kenmore Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...