Kenmore 19365 Computerized Sewing Machine "thread bobbin sears" Questions

...thread a bobbin,sears Kenmore model 158.17031 Place both the bobbin case and the bobbin on the table in front of you. Have the open side of the bobbin case facing up and the bobbin with the thread of ...

...thread to wind a bobbin for the machine also. all machines thread the same. TTN tension,take up, needle. Beginning with the spool, guide the thread through the thread guides to the tension assembly. ...

thread on the bobbin If, I were you, I would take to Sears, to the sewing machine department and have the salesman show me how to thread it and wind the bobbin. You can order a manual from Sears parts

...thread my bobbin on my Sears Kenmore sewing machine, Model #158.15160. My bobbin spindle is not turning. What am I doing wrong? Is there thread stuck on the spindle? If the bobbin is inserted the ...

...thread the bobbin hi there, on my manual 1581 kenmore show figure on how you thread your bobbins and upper thread. to thread bobbin insert the thread on one hole of winder holding thread and rotate ...

thread bobbin on a Kenmore sewing maching,,model 148-19371 You can try a couple of YouTube videos: Loading thread on the bobbin old Kenmore sewing machine (do not wind the bobbin as fast as he does as

...bobbin thread my needle thread will not pick up the bobbin thread. My machine jammed and since then, the needle thread will not pick up the bobbin thread. Needle may need to be changed. Be sure it is ...

...bobbin thread around the case and into the notch near the front of the bobbin case. Continue to pull the thread lightly around to the second notch. Leave about 6" of thread out past the second notch. ...

...bobbin thread is too loose and all over the place. How do you adjust the tension on the kenmore sewing machine for bobbin tension? Most of your problems can be solved by taking care of your top ...

...bobbin thread won't rise? I have tried and tried to raise the bobbin thread, but it seems like the sewing thread gets caught somewhere and it just won't raise the bobbin thread. Make sure that your ...