Kenmore 19365 Computerized Sewing Machine "bobbin pops place" Questions

...Place an empty bobbin on the bobbin spindle. 5. Push the bobbin lever to the right to wind. A pop-up appears on the screen to inform you that bobbin winding is on. Press the foot control or the ...

bobbin out of the case. I've tried to see where to tighten it down but can;t find any place that needs to be tighten down. Hi Kathy it sounds like maybe something is in/under your bobbin case.

the thread which pops the bobbin, check under the boobin case make sure it clear of dirt and thread, also the piece under the bobbin case may also have been push out of place make sur it is in correct

place bobbin holder back into machine bobbin case will not stay stationary, bobbin keeps popping up the bobbin case probably needs to be replaced and the hook and hook race may need to be check to see

The bobbin case on my Singer 7462 keeps popping out.... I can get in place and hear a clicking to indicate its in...but it keeps popping out... buy a new bobbin

...Bobbin holder case popped out, and does not go back in. Everytime we get it back in place, and start the fly wheel, it pops back out again. it sound like the machine needs to be serviced by a sewing ...

...place or buy a separate bobbin winder for less than the service charge. Firstly, have you checked the manual? if you don't have one go ...

bobbin case is loose and pops out when started. it is not inserted correctly make sure you hold the clasp when inserting case and hear the slick into place make sure upper thread is threaded right and

...place? Your bobbin is too short. The correct bobbin must be even with the bobbin case. If it is the bobbin case that is moving around then you must adjust the inner rotary hook bracket assy. It must ...

...place the bobbin on the bobbin winder on top of your machine, you then push the lever closest to it into the bobbin until it clicks. most newer machines will automatically quit using the needle when ...