brother industrial sewing machine bottom stitch slack tention adjusted, bottom stitches stilo slack Please describe further what you are seeing on the seam? Loops on bottom? Loops on top?
Question about Sewing Machines
...evenly. Make sure you lift up the quilt in front of the presser foot and allow the fabric some slack. When the slack is gone, lift up the quilt and give it more slack before continuing to
...slack when you go to start a new stitch, and as the needle decends, the thread is pulled through the eye. Just try to pull a little more thread through before you recommence.......just why ...
Question about Sewing Machines
stitch for empisal cresta 2000 is slack, how to make it tight? I want to make my stitch tighter try increasing needle tension little by little Hi. Do you have the manual. I was gifted then machine and
singer 6235, tension, top thread straight The bottom stitch looks fine, but, the top stitching is straight and pulls right out. Bottom tension needs tightening and top tension slacking off
how to sew top elastic top stitch in ladies slacks? You can use a wide zig zag stitch.
...recommended to hold each thread until the stitching gets started, see your manual. I make sure the slack is removed from each thread just before putting the presser foot down, then just put a finger ...
...tension should be at, but ii always just pul the thread manually an if it glides through machine a wee sample check you bottom stitch if it's slack , tighten the tension, if it's tight slacken ...
after 2 stitches needle is caught in ball of thread bobbin may be slack or slipping More likely, you forgot to hold the bobbin and top thread ends together behind the presser foot when starting a seam
slack or all of them i dont no what knob is for the top stitchs and which is the under neath Forget the three knobs for tension adjustment, only the top tension knob should be about 4 or 5, you should
156 questions posted
Usually answered in minutes!
125 Questions
111 Questions
69 Questions
52 Questions
