Kenmore 15218 Mechanical Sewing Machine "front designer" Questions

Ad

Question about Husqvarna Sewing Machines

1 Answer

...Designer SE series you pull the plate toward you and it will come out. There is a slot at the back of the plate that you can insert a small screw driver tip to push it forward by twisting the screw ...

Ad

Question about Husqvarna Sewing Machines

1 Answer

designer I and the touch screen is frozen. I have turned it on and off to try and reset it, plugged and unplugged etc... Nothing works. Is there anything else I can do? The front cover will have to be

Ad

Question about Husqvarna Sewing Machines

1 Answer

...front.  design done yesterday was great without this problem.  today can't seem to figure out what i'm doing different or wrong.  any suggestions? Not sure what a 4D machine ...

Question about Husqvarna Sewing Machines

2 Answers

...designer both comes off easy On the front right hand side of the embroidery arm there is a release lever that allows the arm to be removed. Designer Usb User Manual Built in Usb Port Embroidery ...

Question about Husqvarna Sewing Machines

1 Answer

...Designer 1 (which is what I have) and the lower feed dogs is a serrated dial (looks like part of a circle sticking out of the machine) located on the lower front of the free arm about 2 inches to the ...

...front/top right-hand side, like on the 600 series and the Designer series??? If so, go to this website: http://www.sewmuch4retirement.com/tips/threadingbobbin.html This shows the Designer 1 machine, ...

...out any lint, also under the needle plate, then replace needle plate , bobbin case and the little front cover. replace the bobbin , checking that you have the thread going the correct way. *

Question about Husqvarna Sewing Machines

1 Answer

...Designer I. The users guide says to turn the knob on the front of the machine but the machine doesn't have knob on the front. So how do I lower the feed dogs if I'm doing a tacking stitch The white ...

Question about Husqvarna Sewing Machines

1 Answer

Designer 1 area. Yes, you do need to remove screws in the bottom to remove the covers. I do not recommend that you do this due to electrical safety issues. When the front cover is lifted away from the

Designer 1? Accidentally knocked the main spool holder from its place on the front of the machine. I need instructions on how to replace it. i am sure you can go to manufacturer on line and download a

Not finding what you are looking for?
Kenmore 15218 Mechanical Sewing Machine Logo

68 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Sewing Machines Experts

Cindy Wells

Level 3 Expert

6688 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Kenmore Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...